Chengdu Lift Machinery & Electrical Equipment Co., Ltd. - Ghana

Main Technical Specification
1. Single wire diameter: Φ1.3-Φ5.0mm
2. Max. stranding dia.: Φ21mm
3. Max. rotating speed of the tubular: 600r/min
4. Drawing wheel diameter: Φ1250 (duel wheel )mm
5. Pulling wire speed: 15.7-246m/min
6. Pitch range: 40.22-448.07mm
7. Direction of stranding: two directions, left and right
8. Main motor (Alternation frequency conversion motor frequency conversion adjusting speed) Y280-8B3 740r/min 45kw (AC VS)
9. Take-up motor BPY132S-4, 5.5kw frequency conversion motor
10. Outlet wire speed 15-110m/min
11. Front pay-off reel Φ630 x Φ355 x 475 (hole 127)mm
Φ1000 x Φ490 x 710 (hole 80) mm
12. Pay-off reel in the tubular Φ630 x Φ355 x 475 (hole 127)mm
13. Take-up bobbin PN800-PN2000mm
14. Overall size 23850 x 2680 x 1626mm

Main Composition:
18-ton lead smelter
10-ton holding & cleansing furnace
Vertical type lead sheath stripper
Lead strip conveyor & feeder
Main engine and extruder
Take-up
Control panel

Main Technical Data:
Diameter of lead sheath extruder screw: 150mm
Cooling water capacity: 6.8t/h
Rotate speed of screw: 5-150rpm
Total power: 145kw
Turnout of lead extruder:
Pure lead (13-15rpm): 30-35kgs/min
Soft alloy (11-12rpm): 20-22kgs/min
Hard alloy (9-10rpm): 15-16kgs/min
Power of 18-ton lead smelter: 141.1KW
Power of 10-ton holding cleansing furnace: 101.1KW
Power of vertical type lead sheath stripper: 15kw
Power of lead strip conveyor & feeder: 1.5kw
Diameter range of lead sheath: A die stator fame 10-80mm
B die stator fame 40-110mm
Dia. Range of drum of Take-up: Ф250-Ф2500
Capacity of 18-ton lead smelter: 18ton
Overall size: 22000 x 13340 x 5100mm
Capacity of 10-ton holding & cleansing furnace: 10ton
Total weight: 41100kgs

Main Components:
Four-wheel type casting machine, active fore traction, automatic shearer, active straightening device, frequency doubling induction heater, active feeding device, 2+12 aluminum alloy rod continuous rolling machine, conic pipe rolling wheel drum type rod guiding coiler, dual-basket rod take-up, continuous casting and rolling line electrical control system, continuous rolling machine lubricating oil system, continuous rolling machine lubricating oil system, continuous rolling machine emulsion circulation system etc.

Main Technical Data
1. Produced rod diameter: Ф9.5mm, Ф12mm, Ф15mm
2. Max. theoretic production capacity: 5.278t/h (Ф9.5mm aluminum or aluminum alloy rod)
3. Main equipment dimension: 40x7.8x5.1m (excluding furnace and cooling circulation system)
4. Main equipment weight: 65 tons
5. Total Power: 800kw

Main Technical Data
1) Inlet wire diameter: φ9.5 mm
2) Outlet wire diameter: φ2.6-4.5mm(aluminum and alloy)
Φ2.2-4.7mm (normal aluminum)
3) Max. speed: 22m/s
4) Drawing wheel diameter: Φ450mm
5) Max. drawing pass: 13
6) Max. accumulating wire length: 7m
7) Take-up bobbin PND630-800(DIN46397)
8) Drawing wire main motor: 315kw (DC)
9) Motor for finish capstan: 75kw (DC)
10) Take-up motor 2x30kw(DC)

Composition of Machine
1) Pay-off frame 1 set
2) Drawing machine 1 set
3) Φ630-Φ800 single take-up machine 1 set
4) Φ800 circle take-up machine 1 set
5) Wire accumulating equipment 1 set
6) Crushing head through mold machine 1 set
7) Electrical control system 1 set

Main Data:
1) Diameter of inlet wire: Φ8 mm (cool rolling solid copper rod)
2) Diameter of outlet wire: Φ1.3-4.0mm
3) No. of drawing mold: 13
4) Diameter of drawing wheel: Φ450mm x Φ400mm x 65mm
5) Max speed of outlet wire: 25m/s
6) Annealing method: DC annealing
7) Main motor: 280KW (DC), 1000r/min
8) Motor Z4-200-31 for capstan with fixed speed: 90KW(DC), 1500r/min
9) Power of motor for take-up with double reels: Z4-132-3, 22KW (DC, 2 sets)
10) Annealing power: 360KVA (max.)

Composition of the Equipment
1) Pay-off frame with column and rocker 1 set
2) Main machine for drawing with horizontal sliding 1 set
3) Device for horizontal continuous annealing 1 set
4) Device for tension controlling of accumulator 1 set
5) Take-up machine with double reels 1 set
6) Take-up machine in the way of loop 1 set
7) Machine for crushing head through mold 1 set
8) Electrical control system 1 set
9) Steam generator 1 set
10) Lubricating system for gear box 1 set

Main Technical Data
1) Outlet copper rod dia. φ8mm
2) Production capacity around 16t/h
3) Coil’s weight 3.0-5.0 ton
4) Main equipment total size: 42x7.8x5.1m
(melting furnace and recycling cooler & filter excluded)
5) Main equipment total weight( melting furnace excluded) 82 ton
6) Main equipment total power(melting furnace excluded) 600kw

Line Composition
1) Five-wheel continuous casting machine (Patent No. ZL00244512.3) 1 set
2) Automatic shearer 1 set
3) Straightening & shaving machine 1 set
4) Cast bar brushing machine 1 set
5) Automatic feeding continuous rolling mill 1 set
6) Continuous rolling mill emulsion lubrication system 1 set
7) Rolling mill oil lubrication system 1 set
8) Coiler 1 set
9) Electrical control system 1 set